Tapered Roller Bearing Assemblies

Contact Now

Bearing Setting With tapered roller bearings, the term “setting” simply in-dicates the specific amount of end-play (axial clearance) or pre-load (axial interference) within a mounted bearing. The flexibility to easily adjust and optimize setting at the time of assembly is an inherent advantage of tapered roller bearings. Axle shaft bearings are mounted at inboard locations and support the weight of the vehicle while keeping a drive axle centered in place as it rotates. Ball-type bearings, straight roller bearings, and tapered type roller bearings are all used in these axle shaft bearing assemblies, and they vary depending on manufacturer preference.

 

Therefore, the cone assembly and cup of bearings with the same basic number suffixed by J are internationally interchangeable. Among metric-design tapered roller bearings specified by ISO 355, there are those having new dimensions that are different than the dimension series 3XX used in the past. Part of them are listed in the bearing tables.

 

TIMKEN LM11949-90022 Tapered Roller Bearing Assemblies

75 mm f7 m/s
0 m/s 1 m/s

TIMKEN LM11949-90019 Tapered Roller Bearing Assemblies

120.0000 mm 7000 rpm
6000 rpm 45000 N

TIMKEN 590A-90228 Tapered Roller Bearing Assemblies

0.3 mm 45 mm
0.3 mm 6.55 kN

TIMKEN LM272249DW-902A6 Tapered Roller Bearing Assemblies

2 x 5/8-11 UNC 88.9 mm
167.481 mm 35.719 mm

TIMKEN LM272249DW-902B2 Tapered Roller Bearing Assemblies

950 N 19.0000 mm
Two Shields 26000 rpm

TIMKEN LM11949-90012 Tapered Roller Bearing Assemblies

242 mm 5 mm
500 r/min 0.4

TIMKEN LM11949-90011 Tapered Roller Bearing Assemblies

20400 N 7000 rpm
23.80 mm 28600 N

TIMKEN LM272249DW-90066 Tapered Roller Bearing Assemblies

0.3 mm 3.5 mm
0.8 mm 2.63 g

TIMKEN LM272249DW-90043 Tapered Roller Bearing Assemblies

373 kg 10 mm
HMV 180E Tr 900x7

TIMKEN LM11749-60000/LM11710-60000 Tapered Roller Bearing Assemblies

0.794 mm 4 x 12.7
14.287 mm 104.775 mm

TIMKEN LM11749-90018 Tapered Roller Bearing Assemblies

7000 rpm 1.00 mm
7000 rpm 30.000 mm
1/16